|
Model
|
Description
|
|
|
| Alignment/Service Related |
|
| CN-3 | SMA to BNC Adaptor |  |
| FIF-8 | Firmware Writer. Unit comes with a cable for the muli-pin radios (VX-900, VX-4000, etc.). Please order the CT-92 cable for firmware updating of modular connector radios (VX-3200, VX-4200, VXR-9000, etc.). Powered by a PA-23B (not supplied). | |
| Alkaline Battery Cases |
|
| FBA-27 | Alkaline Battery Case (Requires 6 AA Cells) | |
| Antennas |
|
| ATU-6A | 400-430 MHZ / BROWN / 6.5" / VX10UA/600/800/900 |  |
| ATU-6AS | Antenna 410-430 MHZ / 3.5" |  |
| ATU-6D | 450-485 MHZ / RED / 6" / VX-10/160/180/210/400/600/800/900 |  |
| ATV-10A | High Gain antenna, 145-155MHz (Red) / 10.5" |  |
| ATV-10B | High Gain antenna, 150-160MHz (Brn) / 10.5" |  |
| ATV-10C | High Gain antenna, 155-165MHz (Blk) / 10.5" |  |
| ATV-10E | High Gain antenna, 165-175MHz (Org) / 10.5" |  |
| ATV-6A | Antenna 134-151 MHz / 4" |  |
| ATV-6B | Antenna 150-163 MHz / 3.5" |  |
| ATV-6C | Antenna 161-174 MHz / 3.5" |  |
| ATV-6XL | 7" untunned VHF antenna |  |
| ATV-8A | Antenna 134-150 MHz / Sable / 6" |  |
| ATV-8B | Antenna 150-163 MHz / Sable / 6" |  |
| ATV-8C | Antenna 162-174 MHz / Sable / 6" |  |
| Batteries |
|
| FNB-V69LI | 7.4 V 2800mAh Lithium-Ion Battery Pack | |
| FNB-V69LIIS | 7.4 V / 2800 mAh Lithium Ion Battery Pack, Intrinsically Safe version | |
| Belt Clip |
|
| CLIP-17C BELT CLIP | CLIP-17C BELT CLIP |  |
| Cases |
|
| LCC-900 | Leather Case | |
| LCC-900/TT | Leather Case w/Belt Loop (for 16 Keypad Version) | |
| LCC-900S | Leather Case with Swivel uses Radio's Belt Clip | |
| LCC-900S/TT | Leather Case with Swivel (for 16 Keypad Version) | |
| Charger |
|
| VAC-900 | Charge Stand Only for VCM-1 (Without Power Supply) | |
| VCM-1 | Vehicular DC Charger Mounting Adaptor.
[Requires a charging base: VAC-801 (CD-45), VAC-810 etc.]
|  |
| Headsets and Surveillance |
|
| VH-110 | Heavy Duty, Dual Muff Over The Head Style With Boom Mic, Intrinsically Safe |  |
| VH-115M | Lightweight Headset w/ Boom | |
| VH-120 | 3 Wire Mini Lapel Mic Surveillance Kit, Intrinsically Safe |  |
| VH-130 | 2 Wire Palm PTT Surveillance Kit, Intrinsically Safe |  |
| VH-215M | Lightweight Padded Headset, Single Speaker | |
| VH-225M | Lightweight Padded Headset, Dual Speaker | |
| Programming and Installation |
|
| CT-105 | FIF-10 interface cable to connect:
VX-530/600/800/900 Portables also VX-5500/VX-6000 Mobiles. | |
| CT-70 | Radio Programming Cable (Requires VX VPL-1 Cable) | |
| CT-72 | Cloning Cable (Set-to-Set Clone) |  |
| EC014N951 | VX-600 VHF Service Manual | |
| EC014U950 | VX-600 UHF Service Manual | |
| FIF-10A | FIF-10A USB Interface for PC programming. Check specific models for additional cable pigtails. Pigtails not included. | |
| INST-OPT | Installation Charge. | |
| PROG/ADD | Factory Radio Programming (Each additional channel after 1st) | |
| PROGRAMMING | Factory Radio Programming (single channel only) | |
| VX MPI | Programming Kit for the MDC1200 and the FVP-35 | |
| VX VPL-1 | Programming cable from PC. Check specific models for additional cable pigtails. | |
| Signaling |
|
| F2D-8 | Two-Tone Decoder. (requires FIF-7 if used on the VX-4000 / VX-5500 / VX-6000) |  |
| F5D-14 | Five-Tone Enc/Dec Unit. (requires FIF-7 if used on the VX-4000 / VX-5500 / VX-6000) |  |
| FVP-25 | Encryption Unit (Band Inversion Type) and DTMF Paging. (requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000) |  |
| FVP-35 | Plug-in Rolling Code Encryption. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming |  |
| MDC1200 | MDC1200 ANI Encoder. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming. |  |
| VME-100 | VME-100 BOARD FOR MDC1200 DIGITAL ANI |  |
| Speaker Microphones |
|
| MH-360M | Compact Speaker Microphone for the VX-800, VX-600, and VX-900. | |
| MH-450M | Commercial Speaker Microphone for the VX-800, VX-600, and VX-900. | |
| MH-50A7A | Public Safety Speaker Microphone, MIL-STD Rated, Intrinsically Safe |  |