Meeting Exceptional Performance with a High Power Output

VXR-9000

The VXR-9000, with its 50 W or 100 W options, delivers steadfast performance and an extended range when needed. The sleek and slim-line design ensures easy installation and integration into most repeated sites.
Follow Vertex Standard On

Extensive Channel Capacity with Priority Scan

Equipped with the ability to program up to 32 channels over a wide frequency range, the VXR-9000, which includes the Priority Channel scanning capability, is a reliable choice for efficient communication.

Automatic Power Revert with Alert

In case of a DC power failure at the repeater site, the VXR-9000 will automatically revert to a backup DC power source, which will then transmit an alert message to the operator that immediate attention is required at the repeater site.

Automatic Command Sequence Configuration for Flexibility

The VXR-9000 may be programmed to perform a five-step sequence of commands for certain operating events. For example, during a DC power failure and the repeater switches to a backup power supply, the repeater can be programmed to switch to low power and send a CW ID advising of the situation, etc.

Built for Great Reliability

Designed with a cooling fan diameter of 8cm and thermostatically controlled to ensure a stable temperature environment, the VX-9000 is built for resilience and reliability. Fan operation may be programmed for three options: off, continuous or temperature-controlled, depending on the application. A malfunction alarm is also included.

Additional Features

  • 6 Dual-function programmable keys
  • 47 CTCSS tones / 108 DCS codes encode & decode
  • Multi-tone decode
  • CWIDTransmitter
  • CW Message
  • Compander per channel
  • D-sub 25 pin accessory connector
  • Automatic DC backup switching w/alert
  • EIA rack mount size
General Specification
VHF
UHF
Frequency Range 134 - 160 MHz (A)
146 - 174 MHz (C)
400 - 430 MHz (A)
450 - 490 MHz (D)
Number of Channels 32
Power Supply Voltage 13.6 V DC ± 10%
Current Drain 12 A Maximum (50 W) / 30 A Maximum (100 W)
Channel Spacing 12.5 / 20 / 25 kHz
PLL Steps 2.5 / 5.0 / 6.25 kHz
Operating Temperature Range -30ºC to +60ºC
Duty Cycle RX: 100%
TX: 100% @ 25 W output
Frequency Stability 1.5 ppm, 1.0 ppm (30 min. after wake up)
RF Input-Output Impedance 50 Ohms
Dimension (H x W x D) 483 x 88 x 343 mm
Weight (Approx.) 9.7 kg (50 W model)
Receiver Specification*
VHF
UHF
Antenna Connector BNC
Antenna Impedance 50 Ohms
Receiver Type Double-Conversion Superheterodyne
Sensitivity 12 dB SINAD 0.25 μV, 0.35 μV (20 dB Noise Quieting) 0.3 μV, 0.45 μV (20 dB Noise Quieting)
Selectivity 84 dB / 77 dB
Intermodulation 82 dB/ 80 dB
Spurious and Image Rejection 90 dB
Squelch Threshold 0.4 μV (adjustable)
Audio Distortion < 3 %
Hum and Noise > 50 dB
Audio Frequency Response De-emphasis 6 dB/oct (from 300 Hz to 3 kHz)
Audio Output 4 W @ 4 Ohms
*Measured by TIA/EIA-603
Transmitter Specification*
VHF
UHF
Output Power 50 / 25 / 10 W (100 W optional)
Antenna Impedance 50 Ohms
Antenna Connector Type-N
Duty Cycle 50%
Modulation 16K0F3E, 11K0F3E
Modulation Limiting ± 5.0 kHz / ± 2.5 kHz
Hum and Noise > 50 dB (Wide), > 45 dB (Narrow)
Microphone Sensitivity 5 mV
Microphone Impedance 600 Ohms
Audio Distortion < 2.5% @ 1kHz
Spurious Emission 80 dB below carrier
*Measured by TIA/EIA-603
Accessories
  • MH-67A8J: Standard microphone
  • MD-12A8J: Desktop microphone
  • FP-31: Internal power supply unit
  • VPA-9000: 100W Internal power amplifier unit
  • FIF-9: 4-Wire line interface
Option Boards
  • FVP-25: Voice inversion encryption
  • FVP-35: Rolling code encryption