Dual-Purpose Repeater For Efficient Communications


The VXR-7000 not only lengthens the communication range of two-way radio systems, but also serves as a base station built for convenience and easy fleet communications, which ensures 100% continuous duty cycle in public safety, industrial or administrative work areas.
Follow Vertex Standard On

Convert To Talk At a Press Of A Button

Easy converting of function modes with just a press of the Push to Talk Transmit button.

Local Or Remote Operating Capability

Controlled by the operator with a press of a button, the VXR-7000 is designed to function as programmed. Users could also switch to remote mode and the unit is controlled by instructions received from an external device connected to the accessory connector.

Meeting Safety Standards

Equipped with the DTMF built-in decoding to coordinate with the Emergency and ANI functions found in Vertex Standard mobile and portable two-way radios. If an Emergency alert is received from a mobile or portable radio, the VXR-7000 will beep loudly and blink the LCD to notify the dispatcher of the emergency alert.

Uninterrupted Power Supply

In case of a power failure during operations, the VXR-7000 will immediately switch to the 12-volt rechargeable backup battery, when connected.

Additional Features

  • 16 Channels
  • 47 CTCSS tones / 108 DCS codes encode & decode
  • 8-Character ANI / ENI ID Display
  • CW ID Transmitter
  • DTMF Encode and Decode
  • Community repeater operation (up to 16 tones)
  • Time-Out Timer, Hang Timer, Guard Timer
  • D-Sub 25 pin accessory connector
  • Line interface port
General Specification
Frequency Range 136 - 150 MHz (A)
150 - 174 MHz (C)
400 - 430 MHz (A)
450 - 480 MHz (D))
Number of Channels 16
Power Supply Voltage 200 / 240 V AC ±10% 50/60 Hz or 13.8 V DC
Channel Spacing 12.5 / 20 / 25 kHz
Operating Temperature Range -25º C to +55º C
Frequency Stability ±2.5 ppm
Antenna Impedance 50 Ohms N-type
TX Activation System Carrier-operated, CTCSS tone operated, DCS operated, or remote control
Dimension (H x W x D) 325 x 115 x 391.5 mm
Weight (Approx.) 10 kg
Receiver Specification*
Receiver Type Double-Conversion Superheterodyne
Sensitivity 20 dB SINAD 0.35 μV
Selectivity 80 / 74 dB
Intermodulation 70 dB
Spurious and Image Rejection 90 dB
Audio Output 4 W @ 4 Ohms
*Measured by TIA/EIA-603
Transmitter Specification*
Output Power 10 to 50 W
Duty Cycle 100%
Modulation 16K0F3E, 11K0F3E
Modulation Limiting ± 5.0 kHz / ± 2.5 kHz
Audio Distortion < 2.5% @ 1kHz
Spurious Emission Better than 75 dB below carrier
*Measured by TIA/EIA-603
  • MH-67A8J: Standard microphone
  • MD-12A8J: Desktop microphone
  • MR-3: 19” Rack mount kit (4U size)
  • MR-4: 19” Rack mount kit (3U size)
Duplexer Options
  • CT-68: Duplexer installation kit
  • VXD-60VC: Internal duplexer VHF 148 -160 MHz
  • VXD-60UD: Internal duplexer UHF 440 - 480 MHz