All-Purpose Radio With An Extensive Range Of Built-In Capabilities

VX-350 Series

The compact Vertex Standard VX-350 Series is designed to give you a broad range of functional capabilities and features without paying the extra cash.
Follow Vertex Standard On
Home / Products / Legacy Products / VX-350 Series

Long Battery Life, Longer Performance

Equipped with a 2000 mAh Lithium-Ion battery, the VX-350 Series allows extended talk time for greater convenience and higher productivity - even with the battery save function turned off.

The Ideal Size

The easy-to-carry compact size is ideal for users who prefer swift performance while on the job and is also easy to conceal when necessary.

Ensuring Worker Safety

Equipped with the built-in Emergency notification function, which will switch to a designated channel, send an emergency unit ID and transmit with a live microphone, an added benefit when working alone.

Prevent Unauthorized Usage

If lost or stolen, the VX-350 Series can be remotely disabled immediately by sending a Stun command for temporary disabling or Kill command to permanently disable the radio. Radio must be returned and re-programmed before using again.

Compatibility with Existing MCD System

Add the optional VME-100 board to make the VX-350 Series attuned for use with the rest of your MDC-1200 fleet.

Exclusive Auto-Range Transpond System - ARTS™

Like all other Vertex Standard radios, the VX-350 Series is designed to inform you when you and another ARTS™- equipped station are within communication range. A great solution to keep your workers coordinated.

Additional Features

  • 16 channel capacity
  • Wide band coverage
  • 6 Programmable keys (VX-354)
  • 2 Programmable keys (VX-351)
  • 8-Character alphanumeric display (VX-354)
  • RX/TX Battery power save
  • Lone Worker
  • 2-Tone Encode and Decode
  • CTCSS / DCS Encode and Decode
  • 5-Tone signaling
  • Whisper
  • Priority scan
  • Dual Watch scan
  • Follow-me scan
  • Talk Around scan
  • Radio-to-radio cloning
  • Talk Around scan
  • Radio-to-radio cloning
Dust protected Water Jets
MIL-STD 810 Rating
General Specification
Frequency Range 134 - 174 MHz 400 - 470 MHz; 450 - 520 MHz
Number of Channels 16
Power Supply Voltage 7.4 V DC ±20%
Channel Spacing 12.5/20/25 kHz
PLL Steps 1.25 / 2.5 / 5 / 6.25 kHz 5 / 6.25 kHz
Battery Life (5-5-90 duty)
2000 mAh FNB-V96LI

15.5 hrs (13 hrs w/o saver)

15 hours (12.5 hrs w/o saver)
IP Rating IP 55
Operating Temperature Range -30ºC to +60ºC
Frequency Stability ±2.5 ppm
RF Input-Output Impedance 50 Ohms
Dimension (H x W x D) 105 x 58 x 33 mm (w/FNB-96LI)
Weight (Approx.) 310 g (w/FNB-V96LI, ANT, belt clip)
Receiver Specification*
Sensitivity 12 dB SINAD 0.25 μV
Adjacent Channel Selectivity 65 / 60 dB
Intermodulation 65 / 60 dB
Spurious and Image Rejection 65 dB
Audio Output 500 mW @ 4 Ohms 5% THD
*Measured by TIA/EIA-603
Transmitter Specification*
Output Power 5 / 1 W
Modulation 16K0F3E, 11K0F3E
Conducted Spurious Emissions 65 dB below carrier
FM Hum & Noise 45 / 40 dB
Audio Distortion < 3 % @1kHz
*Measured by TIA/EIA-603
  • MH-360S: Compact speaker microphone
  • MH-37A4B: Earpiece microphone
  • MH-450S: Speaker microphone
  • MH-45B4B: Noise cancelling speaker microphone
  • VH-115S: Behind-the-head headset w/boom mic
  • VH-215S: Over-the-head single-muff headset
  • VC-25: Over-the-head VOX headset
  • VH-130S: 2-Wire earpiece w/palm mic and PTT switch
  • FNB-V96LI: 2000 mAh Li-Ion battery
  • FNB-V95LI: 1800 mAh Li-Ion battery
  • VAC-300: Desktop rapid charger
  • DCM-1: Desktop charger mounting adapter
  • VCM-2: Vehicle mounting adapter for VAC-300
  • VAC-6300: 6-Unit multi rapid charger
  • LCC-351/S: Leather case w/swivel belt clip (VX-351)
  • LCC-354/S: Leather case w/swivel belt clip (VX-354)
Option Boards
  • FVP-25: Voice Encryption & DTMF Paging
  • FVP-35: Rolling Code Encryption
  • FVP-36: Voice Inversion Encryption
  • VME-100: MDC-1200® / GE-STAR® ANI Encode