Wide Band Coverage and High-Power Performance

VX-2200 Series

With 25 Watt power output for effective communications transmission, the VX-2200 Series provides reliability, extensive signaling features and enhanced channel capacity for maximum return on your investment. Die-cast aluminum construction helps dissipate heat and absorbs vibration for durability.
Follow Vertex Standard On
Home / Products / Mobile Radios / VX-2200 Series

Expanded Frequency Options for Greater Coverage

Designed to cover the full band in the VHF and upper range of the UHF bands, get wide band coverage in one radio 134-174MHz VHF and 400-470MHz, 450-520MHz.

Broad Channel Capacity

128 channels for large group communications to get the job done.

More Scanning Options

Compared to other mobile two-way radios in its class, the VX-2200 Series provides exceptional flexibility in scanning features that is designed to optimise operation for a wide variety of environments. In addition to basic scan, you also get Priority, Dual Watch, Follow-me, Follow-me Dual Watch and Talk Around scanning built-in.

When Safety Counts

The VX-2200 Series comes standard with built-in Emergency alert for enhanced driver safety. A panic button can be triggered by the front panel button to alert the dispatcher when problems arise.

Additional Features

  • Four programmable keys
  • 8-Character alphanumeric display
  • RSSI signal strength indicator
  • 2-Tone encode and decode
  • 5-Tone signaling
  • CTCSS / DCS Encode and Decode
  • DTMF Paging
  • Stun / kill / revive (5-tone)
  • Remote listen
  • LoneWorker
  • D-Sub 15 Pin accessory connector
  • Public address / horn alert
  • Radio-to-radio cloning
  • Voting
  • MDC-1200®
General Specification
VHF
UHF
Frequency Range 134 - 174 MHz 400 - 470 MHz
450 - 520 MHz
Number of Channels and Groups 128 and 8 Groups (VX-2200)
8 and 1 Groups (VX-2100)
Power Supply Voltage 13.6 V DC ± 15%
Channel Spacing 12.5 / 20 / 25 kHz
PLL Steps 2.5 / 5 / 6.25kHz 5 / 6.25 kHz
Current Consumption TX: 6A (25W)
RX: 2.5A
Standby: 200mA
Operating Temperature Range --30º C to +60º C
Frequency Stability Better than ± 2.5 ppm
RF Input-Output Impedance 50 Ohms
Dimension (H x W x D) 165 x 45 x 155mm
Weight (Approx.) 1.3 kg
Receiver Specification*
VHF
UHF
Sensitivity 12 dB SINAD >0.25 μV
Adjacent Channel Selectivity 75 dB / 65 dB 73 dB / 65 dB
Intermodulation 73 dB / 70 dB
Spurious and Image Rejection 90 dB 80 dB
Audio Output Internal: 4 W @ 20 Ohms, 5% THD
External: 12 W @ 4 Ohms, 5% THD
*Measured by TIA/EIA-603
Transmitter Specification*
VHF
UHF
Output Power 50 / 25 / 10W (50W)
25 / 12.5 / 5 / 1 (25W)
45 / 25 / 10W (50W)
25 / 12.5 / 5 / 1W (25W)
Modulation 16K0F3E, 11K0F3E
Maximum Deviation ± 5.0 kHz / ± 2.5 kHz
Audio Distortion < 3 % @1 kHz
Conducted Spurious Emission 70 dB below carrier
*Measured by TIA/EIA-603
Accessories
  • MH-67A8J: Standard microphone
  • MH-75A8J: Keypad microphone (16 keys)
  • MD-12A8J: Desktop microphone
  • MLS-100: External speaker, 12W
  • MLS-200: External speaker, 12W (indoor/outdoor use)
  • FP-1030A: External power supply
  • LF-1: DC Line Filter
Option Boards
  • FVP-25: Voice Inversion Encryption & DTMF Paging
  • FVP-35: Rolling Code Encryption
  • FVP-36:Voice Inversion Encryption only
Spec Sheet Downloads
Owner's Manual Downloads